Smart and Multifunctional Materials and their possible application in façade systems

  • Miren Juaristi Universidad de Navarra, School of Architecture
  • Aurora Monge-Barrio Universidad de Navarra, School of Architecture
  • Ulrich Knaack TU Delft, Architecture and the Built Environment - Department of Architectural Engineering + Technology, Architectural Façades & Products Research Group
  • Tomás Gómez-Acebo Universidad de Navarra, TECNUN School of Engineers

Abstract

Today’s society needs to face challenging targets relating to environment and energy efficiency, and therefore the development of efficient façade systems is essential. Innovative concepts such as Adaptive Building Façades might play a role in the near future, as their dynamic behaviour could optimise the performance of a building. For their successful development, a balance between sophistication and benefit is necessary and the implementation of Smart and Multifunctional Materials in building envelopes could be the key, as they have the ability to repeatedly and reversibly change some of their functions, features, or behaviours over time in response to environmental conditions. However, these materials were predominantly developed for use in other fields, and there is a lack of specific technical information to evaluate their usefulness in façade engineering. The aim of this paper is to collect the critical information about promising responsive materials for use in the design of Adaptive Façades, in order to help designers and technicians in decision-making processes and to scope possible future applications in façades. Investigated materials were analysed from the Building Science standpoint; their weaknesses and threats in the built environment were highlighted, and their technical feasibility was examined through the study of their availability in the current market.

References

Addington, D. M., & Schodek, D. L. (2005). Smart materials and new technologies : for the architecture and design professions. Amsterdam: Elsevier, Architectural Press.

Adriaenssens, S., Rhode-Barbarigos, L., Kilian, A., Baverel, O., Charpentier, V., Horner, M., & Buzatu, D. (2014). Dialectic form finding of passive and adaptive shading enclosures. Energies, 7(8), 5201–5220. http://doi.org/10.3390/en7085201

Cabeza, L. F., Castell, A., Barreneche, C., De Gracia, A., & Fernández, A. I. (2011). Materials used as PCM in thermal energy storage in buildings: A review. Renewable and Sustainable Energy Reviews, 15(3), 1675–1695. http://doi.org/10.1016/j.rser.2010.11.018

Dynalloy, Inc. (n.d.). Retrieved March 23, 2018, from http://www.dynalloy.com/tech_data_ribbon.php

Emile, I. (2002). Soil-Ceramics (Earth), Self-adjustment of Humidity and Temperature. Encyclopedia of Smart Materials. Wiley.

Fiorito, F., Sauchelli, M., Arroyo, D., Pesenti, M., Imperadori, M., Masera, G., & Ranzi, G. (2016). Shape morphing solar shadings: A review. Renewable and Sustainable Energy Reviews, 55, 863–884. http://doi.org/10.1016/j.rser.2015.10.086

Fraunhofer Institute for Applied Polymer Research IAP. (n.d.). Retrieved March 23, 2018, from https://www.iap.fraunhofer.de/content/dam/iap/en/documents/FB2/Solardim_ECO_Fraunhofer-IAP.pdf

Gavrilyuk, A., Tritthart, U., & Gey, W. (2007). Photo-stimulated proton coupled electron transfer in quasi amorphous WO3 and MoO3 thin films. Philosophical Magazine, 87(29), 4519–4553. http://doi.org/10.1080/14786430701561516

Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., Dunn, M. L., … Qi, H. J. (2016). Multimaterial 4D Printing with Tailorable Shape Memory Polymers. Scientific Reports (Vol. 6). http://doi.org/10.1038/srep31110

Granqvist, C. G. (2014). Electrochromics for smart windows: Oxide-based thin films and devices. Thin Solid Films, 564, 1–38. http://doi.org/10.1016/j.tsf.2014.02.002

Ibañez-Puy, M., Bermejo-Busto, J., Martín-Gómez, C., Vidaurre-Arbizu, M., & Sacristán-Fernández, J. A. (2017). Thermoelectric cooling heating unit performance under real conditions. Applied Energy, 200, 303–314. http://doi.org/10.1016/j.apenergy.2017.05.020

Jiang, H., Kelch, S., & Lendlein, A. (2006). Polymers move in response to light. Advanced Materials, 18(11), 1471–1475. http://doi.org/10.1002/adma.200502266

Juaristi, M., Monge-Barrio, A., Sánchez-Ostiz, A., & Gómez-Acebo, T. (2018). Exploring the potential of Smart and Multifunctional Materials in Adaptive Opaque Façade Systems. Journal of Façade Design and Engineering; Vol 6 No 2: ICAE2018 Special IssueDO - 10.7480/Jfde.2018.2.2216.

Kanthal. (n.d.). Retrieved March 23, 2018, from https://www.kanthal.com/en/search/?q=bimetal

Kolarevic, B. (2014). Adaptive Architecture: Low-Tech, High-Tech or Both? In M. Kretzer & L. Hovestadt (Eds.), ALIVE : Advancements in adaptive architecture. (p. 220). Basel/Berlin/Boston: Birkhäuser,.

Kornbluh, R. (2008). Fundamental configurations for dielectric elastomer actuators. Dielectric Elastomers as Electromechanical Transducers. Elsevier Ltd. http://doi.org/10.1016/B978-0-08-047488-5.00008-3

Kretzer, M. (2017). Information Materials. Springer International Publishing AG Switzerland. http://doi.org/10.1007/978-3-319-35150-6

Kretzer, M., & Hovestadt, L. (2014). ALIVE : Advancements in adaptive architecture. (NV-1 o). Basel/Berlin/Boston : Birkhäuser,.

Lampert, C. M. (2003). Large-area smart glass and integrated photovoltaics. Solar Energy Materials and Solar Cells, 76(4), 489–499. http://doi.org/10.1016/S0927-0248(02)00259-3

Laughlin, Z., & Howes, P. (2012). Material Matters: New Materials in Design. United Kingdom, Europe: Black Dog Publishing Ltd.

LCRHallcrest. (n.d.). Retrieved March 23, 2018, from https://www.hallcrest.com

Lin, S., & Theato, P. (2013). CO2 -Responsive polymers. Macromolecular Rapid Communications, 34, 1118–33. http://doi.org/10.1002/marc.201300288

Loonen, R. C. G. M., Trčka, M., Cóstola, D., & Hensen, J. L. M. (2013). Climate adaptive building shells: State-of-the-art and future challenges. Renewable and Sustainable Energy Reviews, 25, 483–493. http://doi.org/10.1016/j.rser.2013.04.016

López, M., Rubio, R., Martín, S., Croxford, B., & Jackson, R. (2015). Active materials for adaptive architectural envelopes based on plant adaptation principles. Journal of Façade Design and Engineering, 3(1), 27–38. http://doi.org/10.3233/FDE-150026

Ma, Y., & Zhu, B. (2009). Research on the preparation of reversibly thermochromic cement based materials at normal temperature. Cement and Concrete Research, 39(2), 90–94. http://doi.org/10.1016/j.cemconres.2008.10.006

Madden, J. D. W. (2008). Dielectric elastomers as high-performance electroactive polymers. Dielectric Elastomers as Electromechanical Transducers. Elsevier Ltd. http://doi.org/10.1016/B978-0-08-047488-5.00002-2

Maeda, H., & Ishida, E. H. (2009). Water vapor adsorption and desorption of mesoporous materials derived from metakaolinite by hydrothermal treatment. Ceramics International, 35(3), 987–990. http://doi.org/10.1016/j.ceramint.2008.04.007

Markopoulou, A. (2015). Design Behaviors ; Programming Matter for Adaptive Architecture. Next Generation Building 1, 1, 57–78. http://doi.org/10.7564/15-NGBJ17

materia. (n.d.-a). Retrieved March 23, 2018, from https://materia.nl

Materiability. (n.d.-a). http://doi.org/http://materiability.com

Materiability. (n.d.-b). Retrieved March 23, 2018, from http://materiability.com/portfolio/thermochromics/

Materiability. (n.d.-c). Retrieved April 9, 2018, from http://materiability.com/wp-content/uploads/2014/09/m_06.jpg

Materiability. (n.d.-d). Retrieved March 23, 2018, from http://materiability.com/portfolio/thermobimetals/

MatWeb Material Property Data. (n.d.). Retrieved March 23, 2018, from http://www.matweb.com/search/datasheettext.aspx?matguid=da5f0f16f66446a38bce7b1ee4fe2c61

Mlyuka, N. R., Niklasson, G. A., & Granqvist, C. G. (2009). Thermochromic multilayer films of VO2 and TiO2 with enhanced transmittance. Solar Energy Materials and Solar Cells, 93(9), 1685–1687. http://doi.org/10.1016/j.solmat.2009.03.021

QCR Solutions Corp. (n.d.). Retrieved March 23, 2018, from http://www.qcrsolutions.com/Site/Home___QCR_Solutions_Corp.html

Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., … Tibbits, S. (2014). Active Printed Materials for Complex Self-Evolving Deformations. Scientific reports (Vol. 4). http://doi.org/10.1038/srep07422

Reichert, S., Menges, A., & Correa, D. (2015). Meteorosensitive architecture: Biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness. CAD Computer Aided Design, 60, 50–69. http://doi.org/10.1016/j.cad.2014.02.010

Rossi, D., Augustynowicz, E., Georgakopoulou, S., & Sixt, S. (n.d.). ShapeShift. Retrieved March 23, 2018, from http://caad-eap.blogspot.com.es

Samatham, R., Kim, K. ., & Dogruer, H. . (2007). Active Polymers: An Overview. In J. K. Kwang & S. Tadokoro (Eds.), Electroactive Polymers for Robotic Applications (pp. 1–36). London: Springer.

Seeboth, A., Ruhmann, R., & Mühling, O. (2010). Thermotropic and thermochromic polymer based materials for adaptive solar control. Materials, 3(12), 5143–5168. http://doi.org/10.3390/ma3125143

Smart Films International. (n.d.). Retrieved March 23, 2018, from http://smartfilmsinternational.com/solar-glass/#thermo_glass_download

Watanabe, O., Fukumizu, H., & Ishida, E. H. (2008). Development of an Autonomous Humidity Controlling Building Material, 19–29.

Zhang, Y., Lee, S. H., Mascarenhas, A., & Deb, S. K. (2008). An UV photochromic memory effect in proton-based WO3 electrochromic devices. Applied Physics Letters, 93(20), 10–12. http://doi.org/10.1063/1.3029775
How to Cite
JUARISTI, Miren et al. Smart and Multifunctional Materials and their possible application in façade systems. Journal of Facade Design and Engineering, [S.l.], v. 6, n. 3, p. 19-33, sep. 2018. ISSN 2213-3038. Available at: <https://journals.open.tudelft.nl/index.php/jfde/article/view/2475>. Date accessed: 19 aug. 2019. doi: https://doi.org/10.7480/jfde.2018.3.2475.
Published
2018-09-21