Performance evaluation of buildings with advanced thermal insulation system: a numerical study
In France, and in Europe in general, the building sector is the largest consumer of energy and accounts for about 43% of the total energy consumption and around 25% of CO2 emissions . The building sector offers significant potential for improved energy efficiency through the use of high-performance insulation and energy-efficient systems
In this study, the thermal behavior of buildings with an advanced thermal insulation system, particularly, with the aerogel-based rendering/mortar exterior insulation system is examined. In addition to new buildings, the rendering is very suitable for application to retrofit existing ones since it has a high insulation performance and its application is easy, compatible with the traditional masonry facades, and using the ordinary well-known techniques. Numerical modeling simulations are carried out on three different scales: (a) 1D envelope scale to examine the aerogel-rendering’s impact on the thermal and moisture transfer of exterior walls, (b) 2D envelope scale to examine its impact to limit the heat losses through some types of thermal bridges, and (c) full scale house to examine its impact on reducing the heating demands.
Results show that adding the aerogel-based rendering on the exterior surface of the un-insulated or the already internally insulated walls reduces significantly or removes the moisture risks. It reduces significantly the wall heat losses, especially for old un-insulated buildings, and consequently the building’s energy consumption. In addition, this insulating rendering can act as a very suitable solution for some thermal bridges such as the window reveals. Due to its application technique and its high insulating performance, a small thickness can have great impact on reducing these heat losses. So, this type of insulating renderings/plasters can serve as a good solutions for places where traditional insulation is difficult to apply or where small insulation thicknesses are needed due to space or construction constraints.
EEW (Energy Efficiency Watch), Final Report, 2013. Improving and implementing national energy efficiency strategies in the EU framework.
Enkvist P.A., Naucler T., Rosander J. A cost curve for greenhouse gas reduction, The Mc Kinsey Quaterly, 2007
Verbeeck G., Hens H. Energy savings in retrofitted dwellings: economically viable? Energy & Building – 2004
Koebel M., Rigaccci A., Achard P. Aerogels for Superinsulation: A synoptic view, Chapter 26, p 611, in “Aerogels Handbook (2011), editors: M. Aegerter, N. Leventis, and M. Koebel”.
A. Soleimani Dorcheh. Silica aerogel: synthesis, properties and characterization. J Mater Process Technol (2007)
Reim M., Beck A., Korner W., Petricevic R., Glora M., Weth M., Schliermann T., Fricke J., Schmidt C.H. and Potter F.J. Highly insulation aerogel glazing for solar energy use. Solar Energy Vol. 72, No. 1, pp. 21–29, 2002.
Reim M., Korner W., Manara J., Korder S., Arduini-Schuster M., Ebert H.P., Fricke J. Silica aerogel granulate material for thermal insulation and daylighting. Solar Energy 79 (2005) 131–139.
R. Baetens, B.P. Jelle, A. Gustavsen. Aerogel insulation for building applications: a state-of-the-art review. Energy Build, 43 (2011), pp. 761–769.
E. Cuce, P.M. Cuce, C.J. Wood, S.B. Riffat. Toward aerogel based thermal super insulation in buildings: a comprehensive review. Renew Sustain Energy Rev, 34 (2014), pp. 273–299.
M. Koebel, A. Rigacci, P. Achard. Aerogel-based thermal superinsulation: an overview. J Sol-Gel Sci Technol, 63 (2012), pp. 315–339.
Barbero S., Marco D., Ferrua C., and Pereno A. Analysis on existent thermal insulating plasters towards innovative applications: Evaluation methodology for a real cost-performance comparison. Energy and Buildings 77 (2014), 40-47.
Ibrahim M., Biwole P.H., Achard P, Wurtz E., Ansart G. Building envelope with a new aerogel-based insulating rendering: Experimental and numerical study, cost analysis, and thickness optimization. Applied Energy 159 (2015) Pages 490–501.
Ibrahim M., Wurtz E., Biwole P.H., Achard P. Transferring the south solar energy to the north facade through embedded water pipes. Energy 78, (2014) 834-845.
M Ibrahim, PH Biwole, P Achard, E Wurtz. Aerogel-Based Materials for Improving the Building Envelope’s Thermal Behavior: A Brief Review with a Focus on a New Aerogel-Based Rendering. Energy Sustainability Through Green Energy, (2015) 163-188.
IBP. 2011. WUFI® Pro version 5.1. Holzkirchen, Germany: Fraunhofer Institute for Building Physics. http://www.WUFI. de/index_e.html. (15 January 2013).
Targo Kalamees, Juha Vinha, Hygrothermal calculations and laboratory tests on timber-framed wall structures, Building and Environment 38 (2003) 689–697.
P. Mantha, L.B. Arena, A systematic approach to hygrothermal modeling and compliance with failure criteria using WUFI®, in: Fifth National Conference of IBPSA-USA, August 2012, Madison, WI, 2012.
J. Delgado, N. Ramos, E. Barreira, V. de Freitas, A critical review of hygrothermal models used in porous building materials, Journal of Porous Media 13 (2010) 221–234.
D. Allinson, M. Hall, Hygrothermal analysis of a stabilized rammed earth test building in the UK, Energy and Buildings 42 (2010) 845–852.
F. Antretter, F. Sauer, T. Schopfer, A. Holm, Validation of a hygrothermal whole building simulation software proc. of building simulation 2011, in: 12th Conference of International Building Performance Simulation Association, Sydney, 2011, pp. 1694–1701.
ANSI/ASHRAE 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs, 2007.
VDI Richtlinie 6020, Anforderung an Rechenverfahren zur Gebäude- und Anlagensimulation, VDI-Verlag GmbH, Düsseldorf, Berlin, 2001
Ibrahim M., Wurtz E., Biwole P.H., Achard P., Sallee H. Hygrothermal performance of exterior walls covered with aerogel-based insulating rendering. Energy and Buildings 84 (2014) 241–251.
EN ISO 10211. Thermal bridges in building construction–Heat flows and surface temperatures – Detailed calculations; 2007.
Ibrahim M., Biwole P.H., Wurtz E., Achard P. Limiting windows offset thermal bridge losses using a new insulating coating. Applied Energy 123 (2014) 220-23.
EnergyPlus v. 7.0.0. US Department of Energy. Energy Efficiency and Renewable Energy Office, Building Technology Program, 2011. http://apps1.eere.energy.gov/buildings/energyplus/.
Seem J.E. 1987. Modeling of heat transfer in building. PhD Thesis. University of Wisconsin-Madison, USA.
Walton G.N. 1983. Thermal analysis research program reference manual. NBSSIR 83-2655. National Bureau of Standards.
US Depazrtment of Energy (2014). EnergyPlus Input-Ouput reference (p.17). Retrieved from: http://apps1.eere.energy.gov/ buildings/energyplus/pdfs/inputoutputreference.pdf (Date of last access: April 2015).
EN Standard 15251. Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics, 2007.
Analyse Détaillée du Parc Résidentiel Existant, Report 2009, www.reglesdelart-grenelleenvironnement-2012.fr.
Etude socio-technico-économique du gisement de travaux de rénovation énergétique dans le secteur immobilier résidentiel – Outil de modélisation énergétique territoriale ENERTER. Direction de l'habitat, de l'urbanisme et des paysages (DHUP) 2011.
Typologie des bâtiments d’habitation existant en France. Direction de l'habitat, de l'urbanisme et des paysages (DHUP) 2007.
building thermal performance; aerogel-based render; thermal bridge; building retrofit
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.Author(s) hold their copyright without restrictions.