Smart Energy Dissipation
Damped Outriggers for Tall Buildings under Strong Earthquakes
DOI:
https://doi.org/10.7480/abe.2018.12.2300Keywords:
tall buildings, damped outriggers, seismic energy, earthquake, large-earthquake induced motionAbstract
The use of outriggers in tall buildings is a common practice to reduce response under dynamic loading. Viscous dampers have been implemented between the outrigger and the perimeter columns, to reduce vibrations without increasing the stiffness of the structure. This damped outrigger concept has been implemented for reducing vibrations produced by strong winds. However, its behaviour under strong earthquakes has been not yet properly investigated. Strong earthquakes introduce larger amount of energy into the building’s structure, compared to moderate earthquakes or strong winds. In tall buildings, such seismic energy is dissipated by several mechanisms including bending deformation of the core, friction between structural and nonstructural components, and eventually, damage.
This research focuses on the capability of tall buildings equipped with damped outriggers to undergo large deformations without damage. In other words, when the ground motion increases due to strong earthquakes, the dampers can be assumed to be the main source of energy dissipation whilst the host structure displays an elastic behaviour. These investigations are based on the assessment of both the energy demands due to large-earthquake induced motion and the energy capacity of the system, i.e. the energy capacity of the main components, namely core, outriggers, perimeter columns and dampers. The objective of this research is to determine if the energy dissipated by hysteresis can be fully replaced by energy dissipated through the action of passive dampers.
This research is based on finite element (FE) models developed in Diana-FEA software. These analytical models consider the use of nonlinear settings throughout almost the whole FE model. The numerical investigations on passive damped outriggers are based on master Matlab scripts, which run combined parametric analysis within Diana.
References
Chapter 1
Asai, T., Chang, C.-M., Phillips, B. M. and Spencer Jr, B. F. 2013. Real-time hybrid simulation of a smart outrigger damping system for high-rise buildings. Engineering Structures. 57: 177-188. http://dx.doi. org/10.1016/j.engstruct.2013.09.016
Chang, C.-M., Wang, Z., Spencer Jr, B. F. and Chen, Z. 2013. Semi-active damped outriggers for seismic protection of high-rise buildings. Smart Structures and Systems. 11: 435-451.
Deng, K., Pan, P., Lam, A. and Xue, Y. 2013. A simplified model for analysis of high-rise buildings equipped with hysteresis damped outriggers. The Structural Design of Tall and Special Buildings. 10.1002/tal.1113n/a-n/a. 10.1002/tal.1113
Gamaliel, R. 2008. Frequency-based response of damped outrigger systems for tall buildings
Infanti, S., Robinson, J. and Smith, R. 2008. Viscous dampers for high-rise buildings
Kim, H.-S. and Kang, J.-W. 2017. Semi-active Outrigger Damping System for Seismic Protection of Building Structure. Journal of Asian Architecture and Building Engineering. 16: 201-208. 10.3130/jaabe.16.201
Morales-Beltran, M. and Teuffel, P. 2013. Towards smart building structures: adaptive structures in earthquake and wind loading control response–a review. Intelligent Buildings International. 5: 83-100.
Smith, R. 2016. The Damped Outrigger-Design and Implementation. International Journal of High-Rise Buildings. 5: 63-70.
Smith, R. J. and Willford, M. R. 2007. The damped outrigger concept for tall buildings. The Structural Design of Tall and Special Buildings. 16: 501-517. 10.1002/tal.413
Uang, C.-M. and Bertero, V. V. 1990. Evaluation of seismic energy in structures. Earthquake Engineering & Structural Dynamics. 19: 77-90. 10.1002/eqe.4290190108
Wang, Z., Chang, C.-M., Spencer Jr, B. F. and Chen, Z. 2010. Controllable outrigger damping system for high rise building with MR dampers
Willford, M. and Smith, R. 2008. Performance based seismic and wind engineering for 60 story twin towers in Manila
Zhou, Y. and Li, H. 2013. Analysis of a high-rise steel structure with viscous damped outriggers. The Structural Design of Tall and Special Buildings. 23: 963-979. 10.1002/tal.1098
Zhou, Y., Zhang, C. and Lu, X. 2017. Seismic performance of a damping outrigger system for tall buildings. Structural Control and Health Monitoring. 24: e1864-n/a. 10.1002/stc.1864
Zhou, Y., Zhang, C. Q. and Lu, X. L. 2014. Earthquake resilience of a 632-meter super-tall building with energy dissipation outriggers
Chapter 2
Ahn, S.-K., Min, K.-W., Park, J.-H., Lee, S.-H., Lee, D.-G., Oh, J.-K., Kim, K.-S. and Lee, S.-K. 2008. Practical issues and solutions on installation of viscoelastic dampers in a 46-story reinforced concrete building structure. The Structural Design of Tall and Special Buildings. 17: 231-243. 10.1002/tal.353
Asai, T., Chang, C.-M., Phillips, B. M. and Spencer Jr, B. F. 2013. Real-time hybrid simulation of a smart outrigger damping system for high-rise buildings. Engineering Structures. 57: 177-188. http://dx.doi. org/10.1016/j.engstruct.2013.09.016
ATC-PEER, Applied Technology Council - Pacific Earthquake Engineering Research Center. 2010. Modeling and acceptance criteria for seismic design and analysis of tall buildings.
Chang, C.-M., Asai, T., Wang, Z., Spencer Jr, B. F. and Chen, Z. 2012. Smart outriggers for seismic protection of high-rise buildings
Chang, C.-M., Wang, Z., Spencer Jr, B. F. and Chen, Z. 2013. Semi-active damped outriggers for seismic protection of high-rise buildings. Smart Structures and Systems. 11: 435-451.
Chen, Y., McFarland, D., Wang, Z., Spencer, B. and Bergman, L. 2010. Analysis of Tall Buildings with Damped Outriggers. Journal of Structural Engineering. 136: 1435-1443. 10.1061/(ASCE)ST.1943-541X.0000247 Chen, Y. and Zhang, Z. 2017. Analysis of outrigger numbers and locations in outrigger braced structures using a multiobjective genetic algorithm. The Structural Design of Tall and Special Buildings. 10.1002/tal.1408e1408-n/a. 10.1002/tal.1408
Choi, H. S., Ho, G., Joseph, L. and Mathias, N. 2012. Outrigger design for high-rise buildings. Council on Tall Buildings and Urban Habit
Choi, H. S. and Joseph, L. 2012. Outrigger system design considerations. International Journal of High-Rise Buildings. 1: 237-246.
Connor, J. and Laflamme, S. 2014. Structural motion engineering. Springer: Cruz, C. and Miranda, E. 2017. Evaluation of Damping Ratios for the Seismic Analysis of Tall Buildings. Journal of Structural Engineering. 143: 04016144. 10.1061/(ASCE)ST.1943-541X.0001628
Deng, K., Pan, P., Lam, A. and Xue, Y. 2013. A simplified model for analysis of high-rise buildings equipped with hysteresis damped outriggers. The Structural Design of Tall and Special Buildings. 10.1002/tal.1113n/a-n/a. 10.1002/tal.1113
Fang, C. J., Tan, P., Chang, C. M. and Zhou, F. L. 2015. A general solution for performance evaluation of a tall building with multiple damped and undamped outriggers. The Structural Design of Tall and Special Build-ings. 24: 797-820. 10.1002/tal.1212
Gamaliel, R. 2008. Frequency-based response of damped outrigger systems for tall buildings
Hoenderkamp, J. 2004. Shear wall with outrigger trusses on wall and column foundations. The structural designof tall and special buildings. 13: 73-87.
Hoenderkamp, J. C. D. 2008. Second outrigger at optimum location on high-rise shear wall. The Structural Design of Tall and Special Buildings. 17: 619-634. 10.1002/tal.369
Hoenderkamp, J. C. D. and Bakker, M. C. M. 2003. Analysis of high-rise braced frames with outriggers. The Structural Design of Tall and Special Buildings. 12: 335-350. 10.1002/tal.226
Hoenderkamp, J. C. D., Bakker, M. C. M. and Snijder, H. H. 2003. Preliminary design of high-rise outrigger braced shear wall structures on flexible foundations. Heron. 48: 81-98.
Huang, B. and Takeuchi, T. 2017. Dynamic Response Evaluation of Damped-Outrigger Systems with Various Heights. Earthquake Spectra. 33: 665-685. 10.1193/051816EQS082M
Infanti, S., Robinson, J. and Smith, R. 2008. Viscous dampers for high-rise buildings
Jackson, M. and Scott David, M. 2010. Increasing Efficiency in Tall Buildings by Damping
Jiang, H., Li, S. and Zhu, Y. 2017. Seismic performance of high-rise buildings with energy-dissipation outriggers. Journal of Constructional Steel Research. 134: 80-91. https://doi.org/10.1016/j.jcsr.2017.03.013
Kamgar, R. and Rahgozar, R. 2017. Determination of optimum location for flexible outrigger systems in tall buildings with constant cross section consisting of framed tube, shear core, belt truss and outrigger system using energy method. International Journal of Steel Structures. 17: 1-8. 10.1007/s13296-014-0172-8
Kibayashi, M., Kasai, K., Tsuji, Y., Kikuchi, M., Kimura, Y., Kobayashi, T., Nakamura, H. and Matsuba, Y. 2004. JSSI manual for building passive control technology. Part-2 Criteria for implementation of energy dissipation devices
Kim, H.-S. and Kang, J.-W. 2017. Semi-active Outrigger Damping System for Seismic Protection of Building Structure. Journal of Asian Architecture and Building Engineering. 16: 201-208. 10.3130/jaabe.16.201
LATBSDC. 2014. An Alternative Procedure for Seismic Analysis and Design of Tall Builings Located in the Los Angeles Region.
Morales-Beltran, M. and Teuffel, P. 2013. Towards smart building structures: adaptive structures in earthquake and wind loading control response–a review. Intelligent Buildings International. 5: 83-100.
O’Neill, J. C. 2006. Application of damping in high-rise buildings
Park, K., Kim, D., Yang, D., Joung, D., Ha, I. and Kim, S. 2010. A comparison study of conventional construction methods and outrigger damper system for the compensation of differential column shortening in high-rise buildings. International Journal of Steel Structures. 10: 317-324. 10.1007/BF03215840
Smith, B. S. and Coull, A. 1991. Tall building structures: analysis and design.
Smith, R. 2016. The Damped Outrigger-Design and Implementation. International Journal of High-Rise Buildings. 5: 63-70.
Smith, R., Merello, R. and Willford, M. 2010. Intrinsic and supplementary damping in tall buildings. Proceedings of the Institution of Civil Engineers - Structures and Buildings. 163: 111-118. 10.1680/stbu.2010.163.2.111
Smith, R. J. and Willford, M. R. 2007. The damped outrigger concept for tall buildings. The Structural Design of Tall and Special Buildings. 16: 501-517. 10.1002/tal.413
Spence Seymour, M. J. and Kareem, A. 2014. Tall Buildings and Damping: A Concept-Based Data-Driven Model. Journal of Structural Engineering. 140: 04014005. 10.1061/(ASCE)ST.1943-541X.0000890
Tan, P., Fang, C. and Zhou, F. 2014. Dynamic characteristics of a novel damped outrigger system. Earthquake Engineering and Engineering Vibration. 13: 293-304. 10.1007/s11803-014-0231-3
Tan, P., Fang, C. J., Chang, C. M., Spencer, B. F. and Zhou, F. L. 2015. Dynamic characteristics of novel energy
dissipation systems with damped outriggers. Engineering Structures. 98: 128-140. https://doi.org/10.1016/j.engstruct.2015.04.033
Taranath, B. S. 1998. Steel, concrete, & composite design of tall buildings.
Wang, Z., Chang, C.-M., Spencer Jr, B. F. and Chen, Z. 2010. Controllable outrigger damping system for high rise building with MR dampers
Willford, M. and Smith, R. 2008. Performance based seismic and wind engineering for 60 story twin towers in Manila
Willford, M., Smith, R., Scott, D. and Jackson, M. 2008. Viscous dampers come of age. STRUCTURE magazine. 6: 15-18.
Wu, J. R. and Li, Q. S. 2003. Structural performance of multi-outrigger-braced tall buildings. The Structural Design of Tall and Special Buildings. 12: 155-176. 10.1002/tal.219
Yang, Q., Lu, X., Yu, C. and Gu, D. 2016. Experimental study and finite element analysis of energy dissipating outriggers. Advances in Structural Engineering. 20: 1196-1209. 10.1177/1369433216677122
Yi, F., Dyke, S., J., Caicedo, J., M. and Carlson, J. D. 2001. Experimental Verification of Multiinput Seismic Control Strategies for Smart Dampers. Journal of Engineering Mechanics. 127: 1152-1164. 10.1061/(AS CE)0733-9399(2001)127:11(1152)
Zhou, Y. and Li, H. 2013. Analysis of a high-rise steel structure with viscous damped outriggers. The Structural Design of Tall and Special Buildings. 23: 963-979. 10.1002/tal.1098
Zhou, Y., Zhang, C. and Lu, X. 2016. An inter-story drift-based parameter analysis of the optimal location of outriggers in tall buildings. The Structural Design of Tall and Special Buildings. 25: 215-231. 10.1002/tal.1236
Zhou, Y., Zhang, C. and Lu, X. 2017. Seismic performance of a damping outrigger system for tall buildings. Structural Control and Health Monitoring. 24: e1864-n/a. 10.1002/stc.1864
Zhou, Y., Zhang, C. Q. and Lu, X. L. 2014. Earthquake resilience of a 632-meter super-tall building with energy dissipation outriggers
Chapter 3
Akbas, B., Shen, J. and Hao, H. 2001. Energy appproach in peformance-based seismic design of steel moment resisting frames for basic safety objective. The Structural Design of Tall Buildings. 10: 193-217. 10.1002/tal.172
Akbas, B., Shen, J. and Temiz, H. 2006. Identifying the hysteretic energy demand and distribution in regular steel frames. Steel and Composite Structures. 6: 479.
Akiyama, H. 1988. Earthquake resistant design based on the energy concept
Beiraghi, H., Kheyroddin, A. and Kafi, M. A. 2016. Energy dissipation of tall core-wall structures with multi-plastic hinges subjected to forward directivity near-fault and far-fault earthquakes. The Structural Design of Tall and Special Buildings. 25: 801-820. 10.1002/tal.1284
Benavent-Climent, A. 2011. An energy-based method for seismic retrofit of existing frames using hysteretic dampers. Soil Dynamics and Earthquake Engineering. 31: 1385-1396. https://doi.org/10.1016/j.soildyn.2011.05.015
Bojórquez, E., Reyes-Salazar, A., Terán-Gilmore, A. and Ruiz, S. 2010. Energy-based damage index for steel structures. Steel and Composite Structures. 10: 331-348.
Bruneau, M. and Wang, N. 1996. Some aspects of energy methods for the inelastic seismic response of ductile SDOF structures. Engineering Structures. 18: 1-12. http://dx.doi.org/10.1016/0141-0296(95)00099-X
Chopra, A. K. 1995. Dynamics of structures. Prentice Hall:
Decanini, L. D. and Mollaioli, F. 2001. An energy-based methodology for the assessment of seismic demand. Soil Dynamics and Earthquake Engineering. 21: 113-137. http://dx.doi.org/10.1016/S0267-7261(00)00102-0
Foti, D., Bozzo, L. and López-Almansa, F. 1998. Numerical efficiency assessment of energy dissipators for seismic protection of buildings. Earthquake Engineering & Structural Dynamics. 27: 543-556. 10.1002/(SICI)1096-9845(199806)27:6<543::AID-EQE733>3.0.CO;2-9
Hernandez-Montes, E., Kwon, O.-S. and Aschheim, M. A. 2004. An energy-based formulation for first-and multiple-mode nonlinear static (pushover) analyses. Journal of Earthquake Engineering. 8: 69-88. 10.1080/13632460409350481
Khashaee, P., Mohraz, B., Sadek, F., Lew, H. and Gross, J. L. 2003. Distribution of earthquake input energy in structures. U.S. Department of Commerce
Lu, X., Lu, X., Sezen, H. and Ye, L. 2014. Development of a simplified model and seismic energy dissipation in a super-tall building. Engineering Structures. 67: 109-122. http://dx.doi.org/10.1016/j.engstruct.2014.02.017
Manoukas, G., Athanatopoulou, A. and Avramidis, I. 2011. Static Pushover Analysis Based on an Energy-Equivalent SDOF System. Earthquake Spectra. 27: 89-105. 10.1193/1.3535597
Nakashima, M., Saburi, K. and Tsuji, B. 1996. Energy input and dissipation behaviour of structures with hysteretic dampers. Earthquake Engineering & Structural Dynamics. 25: 483-496. 10.1002/(SICI)1096-9845(199605)25:5<483::AID-EQE564>3.0.CO;2-K
Nariyuki, Y. and Hirao, K. 1988. Effect of Structural and Hysteretic Characteristics on Distribution of Input and Hysteretic Energy of MDOF Systems subjected to Seismic Excitation
Papazafeiropoulos, G., Plevris, V. and Papadrakakis, M. 2017. A New Energy-Based Structural Design Optimization Concept under Seismic Actions. Frontiers in Built Environment. 3: 44.
Park, Y. J., Ang, A. H.-S. and Wen, Y. K. 1984. Seismic Damage Analysis and Damage-LImiting Design of R.C. Buildings.
Prasanth, T., Ghosh, S. and Collins, K. R. 2008. Estimation of hysteretic energy demand using concepts of modal pushover analysis. Earthquake Engineering & Structural Dynamics. 37: 975-990. 10.1002/eqe.802
Shargh, F. H. and Hosseini, M. 2011. An optimal distribution of stiffness over the height of shear buildings to minimize the seismic input energy. Journal of Seismology and Earthquake Engineering. 13: 25.
Shen, J. and Akbas, B. 1999. Seismic energy demand in steel moment frames. Journal of Earthquake Engineering. 3: 519-559. 10.1080/13632469909350358
Sucuo lu, H. and Nurtu, A. 1995. Earthquake ground motion characteristics and seismic energy dissipation. Earthquake Engineering & Structural Dynamics. 24: 1195-1213. 10.1002/eqe.4290240903
Terapathana, S. 2012. An Energy Method for Earthquake Resistant Design of RC Structures
TNO-DIANA 2014. Analysis Procedures
Uang, C.-M. and Bertero, V. V. 1990. Evaluation of seismic energy in structures. Earthquake Engineering & Structural Dynamics. 19: 77-90. 10.1002/eqe.4290190108
Wang, F. and Yi, T. 2012. A Methodology for Estimating Seismic Hysteretic Energy of Buildings
Wong Kevin, K. and Johnson, J. 2009. Seismic Energy Dissipation of Inelastic Structures with Multiple Tuned Mass Dampers. Journal of Engineering Mechanics. 135: 265-275. 10.1061/ (ASCE)0733-9399(2009)135:4(265)
Yanik, A., Aldemir, U. and Bakioglu, M. 2014. Energy Distributions In Actively And Passively Controlled Nonlinear Structures. International Journal of Computational Methods and Experimental Measurements. 2: 14-29. 10.2495/CMEM-V2-N1-14-29
Ye, L., Cheng, G. and Qu, Z. 2009. Study on energy-based seismic design method and the application for steel braced frame structures
Zhou, Y., Zhang, C. Q. and Lu, X. L. 2014. Earthquake resilience of a 632-meter super-tall building with energy dissipation outriggers
Chapter 4
-1-1, E. 2002. Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
-1-1, E. 2004. Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
-1-1, E. 2004. Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
ANSI, A. 2005. AISC 341-05‘‘Seismic provisions for structural steel buildings.’’American Institute of Steel
Construction.
ATC-PEER, Applied Technology Council - Pacific Earthquake Engineering Research Center. 2010. Modeling and acceptance criteria for seismic design and analysis of tall buildings.
Beiraghi, H., Kheyroddin, A. and Kafi, M. A. 2016. Energy dissipation of tall core-wall structures with multi-plastic hinges subjected to forward directivity near-fault and far-fault earthquakes. The Structural Design of Tall and Special Buildings. 25: 801-820. 10.1002/tal.1284
Beiraghi, H. and Siahpolo, N. 2017. Seismic assessment of RC core-wall building capable of three plastic hinges with outrigger. The Structural Design of Tall and Special Buildings. 26: e1306-n/a. 10.1002/tal.1306
Boivin, Y. and Paultre, P. 2012. Seismic force demand on ductile reinforced concrete shear walls subjected to
western North American ground motions: Part 2 — new capacity design methods. Canadian Journal of Civil Engineering. 39: 738-750. 10.1139/l2012-044
CESMD 2014. Strong-motion Virtual Data Center
Chang, C.-M., Wang, Z., Spencer Jr, B. F. and Chen, Z. 2013. Semi-active damped outriggers for seismic protection of high-rise buildings. Smart Structures and Systems. 11: 435-451.
Chen, Y., McFarland, D., Wang, Z., Spencer, B. and Bergman, L. 2010. Analysis of Tall Buildings with Damped Outriggers. Journal of Structural Engineering. 136: 1435-1443. 10.1061/(ASCE)ST.1943-541X.0000247
Chopra, A. K. 2007. Dynamics of structures: theory and applications to earthquake engineering. Prentice-Hall:
Council, A. T. 2010. Modeling and acceptance criteria for seismic design and analysis of tall buildings.
DIANA FEA Release 10.1 TNO - DIANA FEA BV Delft, the Netherlands
Gamaliel, R. 2008. Frequency-based response of damped outrigger systems for tall buildings
Hoenderkamp, J. 2004. Shear wall with outrigger trusses on wall and column foundations. The structural design of tall and special buildings. 13: 73-87.
Huang, B. and Takeuchi, T. 2017. Dynamic Response Evaluation of Damped-Outrigger Systems with Various Heights. Earthquake Spectra. 33: 665-685. 10.1193/051816EQS082M
Infanti, S., Robinson, J. and Smith, R. 2008. Viscous dampers for high-rise buildings
INN-Chile 2009. NCh 433-of. 96 Diseño sísmico de edificios.
Jackson, M. and Scott David, M. 2010. Increasing Efficiency in Tall Buildings by Damping
Lu, X., Lu, X., Sezen, H. and Ye, L. 2014. Development of a simplified model and seismic energy dissipation in a super-tall building. Engineering Structures. 67: 109-122. http://dx.doi.org/10.1016/j.engstruct. 2014.02.017
Rhinoceros 5
Morales Beltran, M., Turan, G. and Yildirim, U. 2017. Distribution of large-earthquake input energy in viscous damped outrigger structures
O’Neill, J. C. 2006. Application of damping in high-rise buildings
Panagiotou, M. and Restrepo, J. I. 2009. Dual-plastic hinge design concept for reducing higher-mode effects on high-rise cantilever wall buildings. Earthquake Engineering & Structural Dynamics. 38: 1359-1380. 10.1002/eqe.905
Rutenberg, A. and Tal, D. 1987. Lateral load response of belted tall building structures. Engineering Structures. 9: 53-67. https://doi.org/10.1016/0141-0296(87)90041-1
Smith, B. S. and Coull, A. 1991. Tall building structures: analysis and design.
Smith, R. 2016. The Damped Outrigger-Design and Implementation. International Journal of High-Rise Buildings. 5: 63-70.
Smith, R. J. and Willford, M. R. 2007. The damped outrigger concept for tall buildings. The Structural Design of Tall and Special Buildings. 16: 501-517. 10.1002/tal.413
Tan, P., Fang, C. and Zhou, F. 2014. Dynamic characteristics of a novel damped outrigger system. Earthquake Engineering and Engineering Vibration. 13: 293-304. 10.1007/s11803-014-0231-3
Taranath, B. S. 1988. Structural analysis and design of tall buildings. McGraw-Hill: New York
Chapter 5
Asai, T., Chang, C.-M., Phillips, B. M. and Spencer Jr, B. F. 2013. Real-time hybrid simulation of a smart outrigger damping system for high-rise buildings. Engineering Structures. 57: 177-188. http://dx.doi. org/10.1016/j.engstruct.2013.09.016
Bojórquez, E., Reyes-Salazar, A., Terán-Gilmore, A. and Ruiz, S. 2010. Energy-based damage index for steel structures. Steel and Composite Structures. 10: 331-348.
Bruneau, M. and Wang, N. 1996. Some aspects of energy methods for the inelastic seismic response of ductile SDOF structures. Engineering Structures. 18: 1-12. http://dx.doi.org/10.1016/0141-0296(95)00099-X
Chang, C.-M., Wang, Z., Spencer Jr, B. F. and Chen, Z. 2013. Semi-active damped outriggers for seismic protection of high-rise buildings. Smart Structures and Systems. 11: 435-451.
Chopra, A. K. 2007. Dynamics of structures: theory and applications to earthquake engineering. Prentice-Hall:
Khashaee, P., Mohraz, B., Sadek, F., Lew, H. and Gross, J. L. 2003. Distribution of earthquake input energy in structures. U.S. Department of Commerce
Smith, R. 2016. The Damped Outrigger-Design and Implementation. International Journal of High-Rise Buildings. 5: 63-70.
Uang, C.-M. and Bertero, V. V. 1990. Evaluation of seismic energy in structures. Earthquake Engineering & Structural Dynamics. 19: 77-90. 10.1002/eqe.4290190108
Willford, M. and Smith, R. 2008. Performance based seismic and wind engineering for 60 story twin towers in Manila
Zhou, Y. and Li, H. 2013. Analysis of a high-rise steel structure with viscous damped outriggers. The Structural Design of Tall and Special Buildings. 23: 963-979. 10.1002/tal.1098
Chapter 6
-1-1, E. 2004. Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
-1-1, E. 2004. Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings Applied Technology Council (ATC 72-1), 2010. Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings, Report No. PEER/ATC-72-1, CA, 242 pp.
Boivin, Y. and Paultre, P. (2012). Seismic force demand on ductile reinforced concrete shear walls subjected to western North American ground motions: Part 2 — new capacity design methods. Canadian Journal of Civil Engineering. 39: 738-750.
Bojórquez, E., Reyes-Salazar, A., Terán-Gilmore, A. and Ruiz, S. (2010). Energy-based damage index for steel structures. Steel and Composite Structures. 10: 331-348.
CESMD, Strong-motion Virtual Data Center. 2014. (Accessed Sep-2014 ww.strongmotioncenter.org)
Choi, H. S. and Joseph, L. 2012. Outrigger system design considerations. International Journal of High-Rise Buildings. 1: 237-246.
CSI (Computers and Structures Inc.).SAP2000 v10 Integrated Finite Element Analysis and Design of Structures.
CSI, Berkeley, 2004
DIANA FEA, DIANA (Displacement Analyzer), Version 10.1. User manual. Delft, Netherlands; 2017.
Gidaris, I. and Taflanidis, A. A. 2015. Performance assessment and optimization of fluid viscous dampers through life-cycle cost criteria and comparison to alternative design approaches. Bulletin of Earthquake Engineering. 13: 1003-1028.
Khashaee, P., Mohraz, B., Sadek, F., Lew, H. and Gross, J. L. (2003). Distribution of earthquake input energy in structures. U.S. Department of Commerce
MATLAB R2013b The MathWorks, Inc. Natick, Massachusetts, United States.
Smith, R. 2016. The Damped Outrigger-Design and Implementation. International Journal of High-Rise Buildings. 5: 63-70.
Sun, F., Hu, Z., Chen, G., Xie, L. and Sheng, L. 2017. Shaking table test on seismic resonant behavior of core-outrigger structure. The Structural Design of Tall and Special Buildings. 26: 1-16. 10.1002/tal.1349
Willford, M. and Smith, R. (2008). Performance based seismic and wind engineering for 60 story twin towers in Manila. Proceedings of the 14th World Conference on Earthquake Engineering, (14WCEE), Beijing, China
Zhou, Y. and Li, H. (2014). Analysis of a high-rise steel structure with viscous damped outriggers. The Structural Design of Tall and Special Buildings. 13: 963-979.
Chapter 7
Beiraghi, H., Kheyroddin, A. and Kafi, M. A. 2016. Energy dissipation of tall core-wall structures with multi-plastic hinges subjected to forward directivity near-fault and far-fault earthquakes. The Structural Design of Tall and Special Buildings. 25: 801-820. 10.1002/tal.1284
Beiraghi, H. and Siahpolo, N. 2017. Seismic assessment of RC core-wall building capable of three plastic hinges with outrigger. The Structural Design of Tall and Special Buildings. 26: e1306-n/a. 10.1002/tal.1306
Chen, Y., McFarland, D., Wang, Z., Spencer, B. and Bergman, L. 2010. Analysis of Tall Buildings with Damped Outriggers. Journal of Structural Engineering. 136: 1435-1443. 10.1061/(ASCE)ST.1943-541X.0000247
Huang, B. and Takeuchi, T. 2017. Dynamic Response Evaluation of Damped-Outrigger Systems with Various Heights. Earthquake Spectra. 33: 665-685. 10.1193/051816EQS082M
Prieto Hoces, A. 2011. Interfaz ambiental en edificios de oficina: envolvente de espesor programático variable como sistema de mediación ambiental pasivo
Tan, P., Fang, C. and Zhou, F. 2014. Dynamic characteristics of a novel damped outrigger system. Earthquake Engineering and Engineering Vibration. 13: 293-304. 10.1007/s11803-014-0231-3
Willford, M. and Smith, R. 2008. Performance based seismic and wind engineering for 60 story twin towers in Manila
